Part Number Hot Search : 
20SP120M MM54C DTC143 35977 BZT5259 V23990 FCH20A S355JD
Product Description
Full Text Search
 

To Download EXB50-48D3V3-1V8 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 EXB50 Dual Series
DC/DC CONVERTERS 50W High Efficiency DC/DC Converters * Two independently regulated positive outputs * Each output offers ultra-wide output voltage trim range (0.8V to 3.6V for EXB50-48D3V3-1V8, 1.5V to 5.25V for EXB50-48D05-3V3) * High efficiency topology, 89% typical * Approved to IEC60950, UL/cUL1950 * Operating ambient temperature of -40C to +70C (natural convection) * No minimum load on either output * Complies with ETS 300 019-1-3/2-3 and ETS 300 386-1
Dual positive output
1
The EXB50 Dual is a 50W independently regulated dual output DC/DC converter specifically designed to meet the power needs of low voltage silicon. Housed in an open frame package with an industry standard 1/2 brick footprint, the EXB50 Dual can deliver up to 8.5A from either output, and up to 11A in total, at temperatures of up to 70C under natural convection. With some forced air and/or reduced ambient temperatures, the EXB50 can deliver up to 8.5A from either output, and up to 17A in total. The converter is primarily intended for the networking, telecoms and wireless markets, where small size, lower output voltages with higher currents, low profile and high efficiency are all key demands. Product features include wide output trim and remote on/off. Overvoltage, short circuit and over-temperature protection combines to make the EXB50 Dual a very robust and flexible product.
All specifications are typical at Vin = 48V, Io1 = 5A, Io2 = 5A, Tamb = 25C unless otherwise stated
TUV
2 YEAR WARRANTY
SPECIFICATIONS
OUTPUT SPECIFICATIONS Voltage adjustability Voltage accuracy Line regulation Load regulation Minimum load Ripple and noise 20MHz bandwidth Transient response peak dev. settling time Short circuit protection EXB50-48D3V3-1V8 EXB50-48D05-3V3 Both outputs Low line to high line Low line to high line Full load to no load Both outputs Both outputs 3A to 5A (1A/10s) and back EXB50-48D3V3-1V8 EXB50-48D05-3V3 0.8V to 3.6V 1.5V to 5.25V 0.5% max. Vout1 0.5% Vout2 0.5% 0.5% 0% 150mV pk-pk max. 30mV rms max. 150mV 400s 17A rms 15A rms
EMC CHARACTERISTICS ETS 300 386-1 table 5 Conducted emissions (See Note 3) Radiated emissions Immunity: ESD air ESD contact EFT DC power EFT signal Radiated field enclosure Surges indoor signal Conducted (DC power) Conducted (signal) Input transients EN55022 with external filter EN55022 with external filter EN55022 Level A Level B Level A
EN61000-4-2 8kV (NP), 15kV (RP) EN61000-4-2 6kV (NP), 8kV (RP) EN61000-4-4 2kV (NP), 4kV (LFS) EN61000-4-4 1kV (NP), 2kV (LFS) EN61000-4-3 10V/m (NP) EN61000-4-5 500V (RP) EN61000-4-6 10V (NP) EN61000-4-6 10V (NP) ETS 300 132-2, ETR 283
GENERAL SPECIFICATIONS Efficiency Basic insulation Input fuse 48V Switching frequency (fixed) Approvals and standards Material Flammability Weight MTBF MIL-HDBK-217 Input/output (See Note 2) EXB50-48D3V3-1V8 EXB50-48D05-3V3 89% typ. 1500VDC 4A slow blow HRC 250kHz 300kHz IEC60950 UL/cUL1950 UL94V-0 42g (1.48oz) 177,362 hours
INPUT SPECIFICATIONS Input voltage range Input current UVLO turn ON voltage UVLO turn OFF voltage 48Vin nominal No load Remote OFF All inputs All inputs 36 to 75VDC 100mA max. 4mA max. 34V typ. 33V typ.
Active high remote ON/OFF Logic compatibility ON OFF (See Note 7) Active low remote ON/OFF Logic compatibility ON OFF (See Note 7)
Open collector ref. to -input Open circuit voltage or >3.2VDC <0.4VDC Open collector ref. to -input 0.4VDC max. Open circuit voltage or >3.2VDC
ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Notes 4 and 5) ETS 300 019-2-3 Air temperature Operating ambient temperature Non-operating -40C to +100C, see curves -40C to +120C Classes T3.1 to T3.5 Low: IEC 68-2-1 -40C High: IEC 68-2-2 +70C Change: IEC 68-2-14 -40C to +70C IEC 68-2-56 10% to 100% RH IEC 68-2-30 Condensation
File Name: EXB50D.PDF Rev: 10 June 2002
Relative humidity
EXB50 Dual Series
DC/DC CONVERTERS 50W High Efficiency DC/DC Converters
INPUT VOLTAGE OUTPUT VOLTAGE 1 2 OUTPUT CURRENT 1 2
(8)
Dual positive output
2
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
OVP 1
(1)
2
TYPICAL EFFICIENCY
MODEL NUMBER (7)
36-75VDC 36-75VDC
Notes
1 2 3 4 5 6
3.3V 5V
1.8V 3.3V
8.5A 7.5A
8.5A 7.5A
4.12V 6.25V
2.34V 4.12V
86.4% 89%
EXB50-48D3V3-1V8 EXB50-48D05-3V3
PROTECTION Short circuit protection Overvoltage protection Thermal protection TELECOM SPECIFICATION Central office interface A ETS300-132-2 input voltage and current requirements Continuous Latching 125C with automatic recovery
7 8
Latching OVP response time is 2ms (typ.). OVP latch is reset by toggling the control input, or by cycling the input voltage. User must provide recommended fuses in order to comply with safety approvals. Meets both level A and level B conducted emissions only with external components connected before the input pins to the converter. Maximum temperature on hotspots not to exceed 110C. See Application Note 127 on Artesyn Technologies website www.artesyn.com. See the long form data sheet for derating curves. For stable operation connect an external output capacitor of at least 100F to each output. Recommended capacity AVX TPS series (e.g. TPSD107*010#0100) or equivalents. Active low remote ON/OFF, is available. Standard product is active high. Designate with the suffix `-R' e.g. EXB50-48D05-3V3-R. Maximum total current from the module is 15A for EXB50-48D05-3V3 and 17A for EXB50-48D3V3-1V8 with airflow.
CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible.
PIN CONNECTIONS PIN NUMBER 1 2 3 4 5 6 7 8 9 10 FUNCTION - Vin No Pin Remote ON/OFF + Vin Vo1 Trim Vo1 Return Vo1+ Vo2 Trim Vo2 Return Vo2+
0.500 (12.70) Vin0.394 (10.00) Max Max open-frame converter height
0.015 (0.37) Min 0.138 (3.50)
O0.040 0.002 (O1.02 0.05) 9 Places
Minimum clearance from bottom of converter to lowest component 2.2800.02 (57.910.5)
All dimensions in inches (mm) General tolerance 0.01in (0.25mm) except where specified otherwise
Vo2+ Vo2-
2.4000.02 (60.960.5)
EXTERNAL OUTPUT TRIMMING
+ OUT
Trim2
1.400 (35.56)
Control
TRIM
Vo1+ Vo1-
Vin+
- OUT + OUT TRIM DOWN TRIM TRIM - OUT TRIM UP
Trim1 1.900 (48.26)
BOTTOM VIEW
Data Sheet (c) Artesyn Technologies(R) 2002 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein.
Please consult our website for the following items:
Application Note
Longform Data Sheet
www.artesyn.com
File Name: EXB50D.PDF Rev: 10 June 2002
0.600 (15.24) 1.000 (25.40) 1.300 (33.02) 1.600 (40.64)
1.000 (25.40)
0.400 (10.16)
0.300 (7.62)


▲Up To Search▲   

 
Price & Availability of EXB50-48D3V3-1V8

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X